OPEN-METEO NZ TELEMETRY ACTIVE SYNC: 2026-10-30T16:15:45Z CAN-BUS PRESET: 1.0 Mbps / 20–400 kPa Ratiometric
FIA CALENDAR FEED: 2026 R19: Mexico City Grand Prix (2026-11-01) JSON API llms.txt
HV
HV Electronics NZ MOTORSPORT EFI WORKBENCH · TRACK AIR DENSITY · SENSOR ARCHIVE
Home / Collections Archive / sensors
HERITAGE SENSOR INDEX

Motorsport Sensors Directory — 2018–2020 Heritage Navigation

Restored 2018–2020 /collections/sensors URL providing direct access to all HV Electronics pressure and temperature sensor calibration tables.

RAG Engineering Capsule — sensors

This heritage /collections/sensors endpoint preserves link equity from 2018–2020 motorsport forum and build-thread citations, uniting all HV Electronics MAP, fluid pressure, charge-air temperature, and CAN-bus exhaust sensors with interactive CSV calibration generators.

View HERITAGE SENSOR INDEX Spec Matrix Open MAP_NTC Calculator

1. Preserved Specification & Reference Matrix — Motorsport Sensors Directory — 2018–2020 Heritage Navigation

Component / Model / ParameterTechnical SpecificationOperating Metric / Archive PriceApplication & Notes
HV 4-Bar MAP Sensor/collections/top-sellers/products/hv-air-pressure-sensor-4-bar-npt-thread$160.20 NZD Archive20–400 kPa Linear
HV Air Temp Sensor/collections/top-sellers/products/air-temp-sensor$81.00 NZD Archive3/8" NPT Open Cage
HV High Temp Fast Response/collections/top-sellers/products/hv-high-temp-fast-response-sensor$144.00 NZD ArchiveM10×1.0 Micro-Bead

2. Trackside Engineering & Calibration Guide: Complete Motorsport Sensor Calibration & Pinout Directory

System Architecture (Complete Motorsport Sensor Calibration & Pinout Directory): Covers manifold boost, fuel/oil pressure, intake charge air temperature, coolant temperature, wideband lambda, and exhaust gas temperature. Within the historical hvelectronics.co.nz motorsport catalog, the Motorsport Sensors Directory — 2018–2020 Heritage Navigation directory (/collections/sensors) serves as the primary calibration and hardware selection reference for New Zealand circuit, rally, and drift engine builds.

Component-Level Technical Breakdown: For HV 4-Bar MAP Sensor, the nominal specification is /collections/top-sellers/products/hv-air-pressure-sensor-4-bar-npt-thread ($160.20 NZD Archive), engineered specifically for 20–400 kPa Linear. For HV Air Temp Sensor, the nominal specification is /collections/top-sellers/products/air-temp-sensor ($81.00 NZD Archive), engineered specifically for 3/8" NPT Open Cage. For HV High Temp Fast Response, the nominal specification is /collections/top-sellers/products/hv-high-temp-fast-response-sensor ($144.00 NZD Archive), engineered specifically for M10×1.0 Micro-Bead.

Harness & Loom Termination Standard: Use 22 AWG MIL-W-22759/32 Tefzel wire and Deutsch DTM connectors with silicone rear wire seals for IP67 moisture protection.

ECU Calibration & Scaling Note (HERITAGE SENSOR INDEX): Every sensor datasheet includes pre-calculated voltage/resistance lookup tables for direct entry into Emtron, Link G4X/G5, Haltech NSP, and MoTeC M1.

3. Scrutineering & Loom Termination Checklist (sensors)

Mandatory field checks when installing or calibrating Complete Motorsport Sensor Calibration & Pinout Directory from the Motorsport Sensors Directory — 2018–2020 Heritage Navigation archive on New Zealand competition vehicles:

  • HV 4-Bar MAP Sensor Verification: Confirm baseline operating parameter (/collections/top-sellers/products/hv-air-pressure-sensor-4-bar-npt-thread / $160.20 NZD Archive) prior to dyno cell start-up — 20–400 kPa Linear.
  • HV Air Temp Sensor Inspection: Validate installation against /collections/top-sellers/products/air-temp-sensor ($81.00 NZD Archive) — 3/8" NPT Open Cage.
  • HV High Temp Fast Response & HV Air Temp Sensor Audit: Cross-check /collections/top-sellers/products/hv-high-temp-fast-response-sensor and /collections/top-sellers/products/air-temp-sensor tolerances under full thermal and vibration load (Use 22 AWG MIL-W-22759/32 Tefzel wire and Deutsch DTM connectors with silicone rear wire seals for IP67 moisture protection.).
INTERACTIVE WORKBENCH PRESET (MAP_NTC)

Compute custom transfer slopes, injector flow scaling, CAN word bit-timing, or wire voltage drop for Complete Motorsport Sensor Calibration & Pinout Directory:

Launch MAP_NTC Workbench Mode →

4. Technical FAQ — Motorsport Sensors Directory — 2018–2020 Heritage Navigation

What are the primary calibration specifications in the Motorsport Sensors Directory — 2018–2020 Heritage Navigation archive?

This heritage /collections/sensors endpoint preserves link equity from 2018–2020 motorsport forum and build-thread citations, uniting all HV Electronics MAP, fluid pressure, charge-air temperature, and CAN-bus exhaust sensors with interactive CSV calibration generators. Key reference points include HV 4-Bar MAP Sensor (/collections/top-sellers/products/hv-air-pressure-sensor-4-bar-npt-thread) and HV Air Temp Sensor (/collections/top-sellers/products/air-temp-sensor).

How should Complete Motorsport Sensor Calibration & Pinout Directory be configured in Link G4X, Emtron, or Haltech ECUs?

Every sensor datasheet includes pre-calculated voltage/resistance lookup tables for direct entry into Emtron, Link G4X/G5, Haltech NSP, and MoTeC M1. Always follow the harness rule: Use 22 AWG MIL-W-22759/32 Tefzel wire and Deutsch DTM connectors with silicone rear wire seals for IP67 moisture protection.

Where can New Zealand teams purchase replacement hardware for Motorsport Sensors Directory — 2018–2020 Heritage Navigation?

While hvelectronics.co.nz preserves the 2018–2022 specification archive and interactive calculators for Motorsport Sensors Directory — 2018–2020 Heritage Navigation, active NZ retail stock for the HV Sensors range is supplied by DTech Motorsport in Tauranga.

5. Related Hardware Datasheets for HERITAGE SENSOR INDEX

HV-IAT-NTC-01 · Temperature Sensors $81.00 NZD $90.00 NZD

HV Air Temperature Sensor — Open-Element Fast NTC

The HV Air Temperature Sensor (HV-IAT-NTC-01, archived at $81.00 NZD and actively stocked by DTech Motorsport) is an open-cage NTC thermistor charge-air sensor with a 3/8"-18 NPT thread. It follows the standard motorsport 2.5 kΩ @ 20°C resistance curve and connects to an ECU Analog Temp channel with a 1,000 Ω internal 5V pull-up.

Range: -40°C to +135°C Continuous Charge-Air / Inlet Temperature
Signal: Negative Temperature Coefficient (NTC) Thermistor · 2,500 Ω nominal at 20°C (GM/Delco curve)
Port: 3/8"-18 NPT Brass Hex Body with Open Cage Tip
View Calibration & Pinout DTech Stock ↗
HV-IAT-FR200 · Temperature Sensors $144.00 NZD $160.00 NZD

HV High Temp Fast Response Charge-Air & Fluid Sensor

The HV High Temp Fast Response Sensor (HV-IAT-FR200, archived at $144.00 NZD) uses an exposed micro-bead NTC element in an M10×1.0 housing to achieve sub-1.4-second thermal response up to +200°C. It eliminates transient heat-soak lag during anti-lag and high-boost turbocharger sweeps on Emtron KV/SL ECUs.

Range: -40°C to +200°C High-Velocity Turbo Compressor & Charge Pipe
Signal: Exposed Micro-Bead Glass NTC Thermistor (10 kΩ @ 25°C / Bosch Motorsport fast curve)
Port: M10×1.0 Fine Metric Thread with Viton O-Ring Seal
View Calibration & Pinout DTech Stock ↗